![]() |
|
Some menus may not appear in the display depending on options or models. If so, it is not applicable to your machine (see Menu overview). |
To change the menu options:
Press ( ) > > on the control panel.
Or press
> > > on the touch screen.Or press
> > select the menu item you want on the touch screen.
Item |
Description |
|||
---|---|---|---|---|
|
Sets the machine ID which will be printed at the top of each fax page that you send. |
|||
|
Sets the fax number which will be printed at the top of each fax page that you send. |
|||
|
Sets the date and time. |
|||
|
Selects the format for displaying time between 12 hr. and 24 hr. |
|||
|
Selects the default fax receiving mode. |
|||
|
This feature works best when you are using an extension telephone connected to the EXT socket on the back of your machine. You can receive a fax from someone you are talking to on the extension telephone, without going to the fax machine. *9* is the remote receive code preset at the factory (see Receiving faxes with an extension telephone). |
|||
|
Selects the country. |
|||
|
Sets the sound/volume option. |
|||
|
If toner in the cartridge has run out, a message informing the user to change the toner cartridge appears. You can set the option for this message to appear or not. |
|||
|
You can set the machine to overwrite data stored in the memory. The machine overwrites the data with different patterns eliminating the possibilities of recovery. |
|||
|
Sets the language of the text that appears on the control panel display. |
|||
|
Sets the machine’s default mode among fax mode, copy mode, or scan mode. |
|||
|
You can set the default paper size to use. |
|||
Sets how long the machine waits before going to power save mode. When the machine does not receive data for an extended period of time, power consumption is automatically lowered. |
||||
|
Sets the time that the machine remembers previously used copy settings. After the timeout, the machine restores the default copy settings. |
|||
|
Sets the length of time the printer waits before printing the last page of a print job that does not end with a command to print the page. |
|||
|
When this option is " ", you can wake up the machine from the power saving mode with the following actions:
|
|||
|
Determine whether or not the machine continues printing when it detects the paper does not match the paper settings. |
|||
|
Optimize print quality according to the machine’s altitude. |
|||
|
Optimizes print quality according to the humidity in the environment. |
|||
|
Allows you to append the required carriage return to each line feed, which is useful for Unix or DOS users. |
|||
|
Shows the product’s firmware version. |
|||
|
Determine whether or not the machine continues printing when it detects the paper does not match. For example, if both tray 1 and tray 2 are filled with the same size paper, the machine automatically prints from tray 2 after the tray 1 runs out of paper.
|
|||
|
Automatically substitutes the printer driver’s paper size to prevent the paper mismatch between Letter and A4. For example, if you have A4 paper in the tray but you set the paper size to Letter in the printer driver, the machine prints on A4 paper and vice versa. |
|||
|
The printer detects the printing data from computer whether a page is empty or not. You can set to print or skip the blank page. |
|||
|
Decides to use or not use the feature.If you set tray 1 to , for example, then tray 1 is excluded during tray switching.
|
|||
|
Allows you to select the PDF type when saving the data as a PDF file.
|
|||
|
You can apply the stamp feature. |
|||
|
Views or prints the phone book or email address list. |
|||
|
Imports data stored on a USB memory stick to the machine. |
|||
|
Exports data stored on the machine stick to a USB memory. |
|||
|
When toner cartridge is empty, this option appears. You can clear the empty message. |
|||
|
Helpful information for what to do if you encounter an error. |
|||
|
Allows you to save print resources and enables eco-friendly printing.
|
|||
|
You can reduce the amount of water vapor produced during printing. |
|||
|
Turns power off automatically when the machine has been in power save mode for the length of time set in > > .
|
|||
|
Allows you to adjust the color setting such as color registration, color density, etc. |
|||
|
This menu allows you to adjust contrast, color by color. It is recommended to use the setting for best color quality. |
|||
|
The machine virtually prints certain patterned image to calibrate the color printing position. This feature enhances the colored image sharper and clearer, which means the machine prints the colored image on the paper more like the one in the monitor.
|
|||
|
|
![]() |
|
Some menus may not appear in the display depending on options or models. If so, it is not applicable to your machine (see Menu overview). |
To change the menu options:
Press ( ) > > on the control panel.
Or press
> > > on the touch screen.
Item |
Description |
---|---|
|
Sets the paper size as A4, Letter, or other paper sizes, according to your requirements. |
|
Chooses the type of the paper for each tray. |
|
Selects from which tray the paper is used. |
|
Sets the margins for the document. |
|
|
|
Sets the paper margins for emulation print page. |
|
Sets the paper margins in multi-purpose tray. |
|
Sets the paper margins in manual feeder tray. |
|
Activates the tray confirmation message. If you open and close a tray, a window asking you whether to set the paper size and type for the tray just opened appears. |
< |
Sets the paper margins for the paper trays. |
![]() |
|
Some menus may not appear in the display depending on options or models. If so, it is not applicable to your machine (see Menu overview). |
To change the menu options:
Press ( ) > > on
the control panel.
Or press
> > > > on the touch screen.
Item |
Description |
|||
---|---|---|---|---|
|
Turns the key sound on or off. A tone sounds each time a key is pressed if this option is on. |
|||
|
Turns the alarm sound on or off. An alarm tone sounds when an error occurs or fax communication ends if this option is on. |
|||
|
Turns on or off the sounds from the telephone line through the speaker, such as a dial tone or a fax tone. With this option set to which means the speaker is on until the remote machine answers.
|
|||
|
Adjusts the dial tone volume. You can select different levels. |
|||
|
Adjusts the ring volume. You can select different levels. |
![]() |
|
Some menus may not appear in the display depending on options or models. If so, it is not applicable to your machine (see Menu overview). |
To change the menu options:
Press ( ) > > on
the control panel.
Or press
> > > on the touch screen.
Item |
Description |
---|---|
Prints a report on the machine's overall configuration. |
|
|
Prints supplies’ information page. |
Prints all of the email addresses currently stored in the machine’s memory. |
|
|
Prints the demo page to check whether your machine is printing properly or not. |
|
Prints fax confirmation result. |
Prints information on the faxes you have recently sent. |
|
Prints information on the faxes you have recently received. |
|
Prints information on the emails you have recently sent. |
|
|
Prints the document list currently stored for delayed faxes along with the starting time and type of each operation. |
|
Prints information on your machine’s network connection and configuration. |
|
Prints the PCL font list. |
|
Prints the PS/PS3 font list. |
|
Prints a usage page. The usage page contains the total number of pages printed. |
|
Prints the information of a fax reports. |
|
This is only available when Job Accounting is enabled from the SyncThru™ Web Admin Service. You can print a report of printout counts for each user. |
![]() |
|
Some menus may not appear in the display depending on options or models. If so, it is not applicable to your machine (see Menu overview). |
To change the menu options:
Press ( ) > > on
the control panel.
Item |
Description |
---|---|
|
When toner cartridge is empty, this option appears. You can clear the empty message. |
|
Shows the supply life indicators (see Monitoring the supplies life.) |
|
Allows you to adjust the color setting such as color registration, color density, etc. |
|
Customizes the level to alert toner low or toner empty (see Setting the toner low alert). |
|
Shows the machine’s serial number. When you call for service or register as a user on the Samsung website, you can find this. |
|
If you use a machine in a humid area, or you are using the damp print media caused by a high humidity, the print-outs on the output tray may be curled and may not be stacked properly. In this case, you can set the machine to use this function to let print-outs be stacked firmly. But, using this function will make the print speed slow. |
|
Enables/disables Ram disk to manage jobs. |
![]() |
|
Some menus may not appear in the display depending on options or models. If so, it is not applicable to your machine (see Menu overview). |
To change the menu options:
Press ( ) > > on the control panel.
Item |
Description |
---|---|
|
Shows the print job lists that are waiting to be printed. |
|
Shows the print job lists that are stored on the disk. |
|
Shows the print job lists that are secured on the disk. |
![]() |
|
Some menus may not appear in the display depending on options or models. If so, it is not applicable to your machine (see Menu overview). |
Press
> > > on the touch screen.
Option |
Description |
---|---|
|
Adds, views, prints or deletes the phone book list. You also can create a group. |
|
Adds, views, prints or deletes the email list. You also can create a group. |
|
Prints the address book. |
|
Resets the current address book. |
![]() |
|
Some menus may not appear in the display depending on options or models. If so, it is not applicable to your machine (see Menu overview). |
Press
> > select the menu item you want on the touch screen.
Option |
Description |
---|---|
|
Stores the printing data or prints the secure page. |
|
Show the shared folders on your network and save your jobs there. |
![]() |
|
Some menus may not appear in the display depending on options or models. If so, it is not applicable to your machine (see Menu overview). |
![]() |
|
You can also use this feature from the SyncThru™ Web Service. Open the Web browser from your networked computer and type the IP address of your machine. When SyncThru™ Web Service opens, click > (see Using SyncThru™ Web Service). |
Press ( )> > on
the control panel,
Or press
> > > on the touch screen.
Option |
Description |
|||
---|---|---|---|---|
|
Selects the appropriate protocol and configure parameters to use the network environment (see Setting IP address).
|
|||
|
Selects this option to use the network environment through IPv6 (see IPv6 configuration). |
|||
|
Configure the network transmission speed.
|
|||
|
You can selects the user authentication for network communication. For detailed information consult the network administrator. |
|||
|
Selects this option to use the wireless network. |
|||
|
Reverts the network settings to the default values.
|
|||
|
This list shows information on your machine’s network connection and configuration. |
|||
|
You can set whether to use Ethernet on or off.
|
|||
|
You can set whether to use SyncThru™ Web Service or not.
|
|||
|
You can configure the WINS server. WINS(Windows Internet Name Service) is used in the Windows operating system.
|
|||
|
You can set SNMP (Simple Network Management Protocol). Administrator’s can use SNMP to monitor and manage machines on the network. |
|||
|
You can set SNTP (Simple Network Time Protocol) settings. SNTP synchronizes the clocks of the computer systems through the Internet (NTP) so there would not be a time difference when exchanging data. |
|||
|
You can set UPNP protocol.
|
|||
|
You can set mDNS (Multicast Domain Name System) settings. |
|||
|
You can set SetIP settings. |
|||
|
You can configure SLP (Service Location Protocol) settings. This protocol allows host applications to find services in a local area network without prior configuration.
|